The Stanley Numbering System Explained
Last reviewed on 2026-10-04
The Stanley numbering system has been the de facto standard for classifying bench plane sizes since the 1870s. Even planes not made by Stanley — Record, Sargent, Millers Falls, Lie-Nielsen, Veritas — are typically described in Stanley-equivalent numbers because those numbers are what every hand-tool woodworker recognizes. Understanding the system is essential for buying planes, reading old catalogs, and communicating with other woodworkers.
How the Numbers Are Organized
Stanley's numbering is not a perfect arithmetic sequence. It grew organically as the product line expanded. The general rule: within a given family (bench planes, block planes, specialty), lower numbers are shorter or smaller and higher numbers are longer or larger. The bench plane series from No. 1 through No. 8 is the most consistent — each number is progressively longer and wider.
The "½" suffix indicates a wider, slightly longer and heavier version of the base size. A No. 4½ is 10 inches long (an inch longer than a No. 4) and carries a 2⅜-inch iron instead of a 2-inch iron; a No. 5½ is 15 inches long with a 2¼-inch iron. Woodworkers who favor a 4½ over a 4 usually cite the extra mass for quieting chatter on figured wood.
Bench Plane Size Chart
| Stanley No. | Type | Length | Iron width |
|---|---|---|---|
| 1 | Small smoother | 5½ in | 1¼ in |
| 2 | Smoother | 7 in | 1⅝ in |
| 3 | Smoother | 8 in | 1¾ in |
| 4 | Smoother | 9 in | 2 in |
| 4½ | Wide smoother | 10 in | 2⅜ in |
| 5 | Jack | 14 in | 2 in |
| 5¼ | Junior jack | 11½ in | 1¾ in |
| 5½ | Wide jack | 15 in | 2¼ in |
| 6 | Fore | 18 in | 2⅜ in |
| 7 | Jointer | 22 in | 2⅜ in |
| 8 | Jointer | 24 in | 2⅝ in |
Lengths are nominal catalog sizes; individual planes vary slightly by era. Bedrock planes (the 600 series) use the same sizes: a No. 604 matches a No. 4, a No. 605 a No. 5, and so on.
The Basic Numbers
No. 1 - Thumb Plane (5½" long)
The smallest bench plane, rarely seen. Collectible but not practical for most work.
No. 2 - Smoothing Plane (7" long)
Small smoother, 1⅝" iron. Good for musical instruments and small work.
No. 3 - Smoothing Plane (8" long)
Compact smoother with 1¾" iron. Popular for small projects and finishing work.
No. 4 - Smoothing Plane (9" long)
The standard smoothing plane. 2" iron. This is the most common and versatile size. Perfect first plane.
No. 4½ - Smoothing Plane (10" long)
Wider than No. 4 with 2⅜" iron. More mass helps reduce chatter in figured wood.
No. 5 - Jack Plane (14" long)
The "jack of all trades." 2" iron. Can smooth, joint edges, and dimension stock. Extremely versatile.
No. 5½ - Jack Plane (15" long)
Longer and wider than No. 5 with 2¼" iron. More stable for edge jointing.
No. 6 - Fore Plane (18" long)
Uncommon size between jack and jointer. 2⅜" iron. Less popular than No. 5 or No. 7.
No. 7 - Jointer Plane (22" long)
Long jointer for flattening boards and jointing long edges. 2⅜" iron. Essential for serious hand tool work.
No. 8 - Jointer Plane (24" long)
The longest standard bench plane. 2⅝" iron. Maximum flatness for large work.
Specialty Designations
Block Planes
- No. 9½: Standard angle block plane
- No. 60½: Low angle block plane (most popular)
- No. 65: Low angle block plane with adjustable mouth
Other Planes
- No. 71: Router plane
- No. 78: Rabbet plane
- No. 90: Bullnose rabbet plane
- No. 92: Shoulder plane
The "½" Designation
Planes with ½ added (4½, 5½) are wider, slightly longer versions with heavier castings. They cost more but offer better stability and reduced chatter.